Aironet 1310 Transmitter Power??

Unanswered Question

I have approx 20 Cisco Aironet 1300 AP's that I use as Bridges to connect Various wide-spread, non-adjoining offices together. I do not have any problems as such, but obviously, some of the connections are stronger/faster than others due to various factors. But 1 thing I have noticed is that some of the AP's radios are rated (Transmitter Power CCK/OFDM) at 50mw and some at 20mw, and generally the 50mw AP's link seems to be faster. Therefore I have tried my best to upgrade the 20mw to 50mw - matching the radio settings, upgrading the IOS - but it doesn't change. All the AP's were purchased at roughly the same time and from the same vendor.

I have tried a few IOS's, but most of the AP's have 12.4.3g.

Can anyone explain this and/or help me upgrade to 50mw if it is possible.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode