07-23-2008 04:01 AM - edited 03-06-2019 12:24 AM
How do you transfer a bootable IOS to a switch from the bootloader switch: prompt? Documentation refers to copy command, but parameters only support flash file system reference. I had a corrupt image in flash, and was forced to delete it, and now the switch only boots to the boot loader prompt. Can I xmodem a new IOS? 3750-24 TS
07-23-2008 04:06 AM
The procedure described below should work for you:
http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml
07-23-2008 04:11 AM
Nevermind - I found the doc - thanks anyway!
08-28-2008 07:44 AM
Yes, you should be able to xmodem a new IOS image over. It will take awhile to copy over as you might already know.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide