%DOT11-4-NO_SSID_VLAN but I put my ssid's in a vlan, didn't I?

Answered Question
Jul 23rd, 2008

Hey Everyone,


I've been googleing around for hours and I can't seem to find this error in my scenario. %DOT11-4-NO_SSID_VLAN


Crisco.com says that that means there are ssids that aren't assigned to a vlan, but I have specified a vlan in each ssid.


Here is my scenario,


We have 2 vlans at our office vlan 2 which is our office LAN and vlan 5 which is a guest vlan going straight to the internet. The access point is a 1240AG with the 12.4(10b)JA3 IOS.


Here is what I have so far:


=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2008.07.23 11:44:50 =~=~=~=~=~=~=~=~=~=~=~=

sho run

Building configuration...


Current configuration : 2706 bytes

!

version 12.4

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

hostname msp2prdwap03

!

enable secret xxx

!

no aaa new-model

ip domain name agostoinc.com

!

!

!

dot11 ssid agosto

vlan 2

authentication open

authentication key-management wpa

wpa-psk ascii 7 ---x--x-x-x-x-x-x-x-x-

!

dot11 ssid guest

vlan 5

authentication open

authentication key-management wpa

wpa-psk ascii 7 -x-x-x-x-x-x-x-x-x-x-x-

!

power inline negotiation prestandard source

!

!

username myuser password x-x-x-x-x-x-x-x-x

!

bridge irb

!

!

interface Dot11Radio0

description -- 802.11b/g Radio --

no ip address

no ip route-cache

station-role root

!

interface Dot11Radio0.2

description -- LAN --

encapsulation dot1Q 2 native

no ip route-cache

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

!

interface Dot11Radio0.5

description -- Guest --

encapsulation dot1Q 5

no ip route-cache

bridge-group 5

bridge-group 5 subscriber-loop-control

bridge-group 5 block-unknown-source

no bridge-group 5 source-learning

no bridge-group 5 unicast-flooding

bridge-group 5 spanning-disabled

!

interface Dot11Radio1

description -- 802.11a Radio --

no ip address

no ip route-cache

shutdown

dfs band 3 block

channel dfs

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

!

interface FastEthernet0

no ip address

no ip route-cache

speed 100

full-duplex

!

interface FastEthernet0.2

description -- Agosto LAN --

encapsulation dot1Q 2 native

no ip route-cache

bridge-group 1

no bridge-group 1 source-learning

bridge-group 1 spanning-disabled

!

interface FastEthernet0.5

description -- Guest --

encapsulation dot1Q 5

no ip route-cache

bridge-group 5

no bridge-group 5 source-learning

bridge-group 5 spanning-disabled

!

interface BVI1

description -- Agosto LAN --

ip address 192.168.2.10 255.255.255.0

ip helper-address 192.168.2.254

no ip route-cache

!

interface BVI5

description -- Guest --

no ip address

no ip route-cache

!

ip default-gateway 192.168.2.1

ip http server

no ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

bridge 1 route ip

!

!

!

line con 0

logging synchronous

line vty 0 4

logging synchronous

login local

transport input ssh

!

end


Dot11Radio0 is reset, line protocol is down

I'm sure I'm missing one command or something dumb like that, any help would be greatly appreciated.


Dylan

Correct Answer by timsmith about 8 years 7 months ago

You don't have the SSID's applied to any radio's yet. If the radio has no SSID's associated to it, it will stay in reset mode.


In your dot11 radio 0 interface, you would need to setup your encryption mode, and apply your SSID's to be used on that radio.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
timsmith Wed, 07/23/2008 - 11:05

You don't have the SSID's applied to any radio's yet. If the radio has no SSID's associated to it, it will stay in reset mode.


In your dot11 radio 0 interface, you would need to setup your encryption mode, and apply your SSID's to be used on that radio.

Iain Goad Mon, 07/07/2014 - 04:00

Hi Guys, I have a similar problem IE

 

DOT11-4-NO_SSID_VLAN: No SSID with VLAN configured. Dot11Radio0 not started.

 

But my Vlan's are on Dot1 0, can you see from my config what I'm foing wrong?

[OK]
ADSLRouterWBG#
ADSLRouterWBG#
ADSLRouterWBG#sh run
Building configuration...

Current configuration : 4573 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ADSLRouterWBG
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$3tXO$tcAFKK9V0kzx3i8uwNAwu0
!
no aaa new-model
!
dot11 ssid Guest
   vlan 3
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7 #############################
!
dot11 ssid Office
   vlan 2
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7 #######################
!
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.200 192.168.1.254
ip dhcp excluded-address 10.10.10.200 10.10.10.254
!
ip dhcp pool Office
   import all
   network 192.168.1.0 255.255.255.0
   default-router 192.168.1.254
   dns-server 8.8.8.8 8.8.8.4
!
ip dhcp pool Guest
   network 10.10.10.0 255.255.255.0
   default-router 10.10.10.254
   dns-server 8.8.8.8 8.8.8.4
!
!
ip domain name Goadsta.co.uk
!
multilink bundle-name authenticated
!
!
!
!
username iain secret 5 $1$1oWr$TWISrtgzotX5Y7U3jQuFg0
!
!
!
bridge irb
!
!
!
interface ATM0
 no ip address
 no atm ilmi-keepalive
 dsl operating-mode auto
!
interface ATM0.1 point-to-point
 no snmp trap link-status
 pvc 0/38
  pppoe-client dial-pool-number 1
 !
!
interface FastEthernet0
 switchport access vlan 2
!
interface FastEthernet1
 switchport access vlan 2
!
interface FastEthernet2
 switchport access vlan 2
!
interface FastEthernet3
 switchport access vlan 2
!
interface Dot11Radio0
 no ip address
 no ip route-cache cef
 no ip route-cache
 !
 encryption vlan 2 mode ciphers aes-ccm tkip wep128
 !
 encryption vlan 3 mode ciphers aes-ccm tkip wep128
 !
 encryption mode ciphers tkip
 !
 broadcast-key vlan 2 change 30
 !
 broadcast-key vlan 3 change 30
 !
 mbssid
 speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
 station-role root
 antenna gain 0
!
interface Dot11Radio0.1
 encapsulation dot1Q 1 native
 no ip route-cache
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.2
 encapsulation dot1Q 2
 no ip route-cache
 bridge-group 2
 bridge-group 2 subscriber-loop-control
 bridge-group 2 spanning-disabled
 bridge-group 2 block-unknown-source
 no bridge-group 2 source-learning
 no bridge-group 2 unicast-flooding
!
interface Dot11Radio0.3
 encapsulation dot1Q 3
 no ip route-cache
 bridge-group 3
 bridge-group 3 subscriber-loop-control
 bridge-group 3 spanning-disabled
 bridge-group 3 block-unknown-source
 no bridge-group 3 source-learning
 no bridge-group 3 unicast-flooding
!
interface Vlan1
 description $$FW_INSIDE$
 ip address 199.199.199.254 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1412
 bridge-group 1
 bridge-group 1 spanning-disabled
!
interface Vlan2
 description $FW_INSIDE$
 ip address 192.168.1.254 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1412
 bridge-group 2
 bridge-group 2 spanning-disabled
!
interface Vlan3
 description Wireless Guest
 ip address 10.10.10.254 255.255.255.0
 ip access-group 113 in
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1412
 bridge-group 3
 bridge-group 3 spanning-disabled
!
interface Dialer0
 description $FW_OUTSIDE$
 ip address negotiated
 ip mtu 1452
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 dialer pool 1
 dialer-group 1
 no cdp enable
 ppp authentication chap pap callin
 ppp chap hostname ##################
 ppp chap password 7 #################
 ppp pap sent-username ############## password 7 ##################
!
interface BVI1
 ip address 192.168.2.210 255.255.255.0
 no ip route-cache cef
 no ip route-cache
!
ip route 0.0.0.0 0.0.0.0 Dialer0 permanent
!
!
no ip http server
no ip http secure-server
ip nat inside source list 1 interface Dialer0 overload
!
access-list 1 remark Permit Interface Dialor overload
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 1 permit 10.10.10.0 0.0.0.255
access-list 113 deny   ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 113 permit ip any any
access-list 113 deny   ip any any
dialer-list 1 protocol ip permit
!
!
!
!
control-plane
!
bridge 1 route ip
!
line con 0
 no modem enable
line aux 0
line vty 0 4
 privilege level 15
 login local
 transport input ssh
!
scheduler max-task-time 5000
end

ADSLRouterWBG#                                                          

 

 

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode