Yes,

It is possible. These are the features supported with QSIG.

Features Supported

CLIP-Calling Line (Number) Identification Presentation

CLIR-Calling Line (Number) Identification Restriction

© 2006 Cisco Systems, Inc. All right reserved.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com

Page 4 of 100

CNIP-Calling Name Identification Presentation

CNIR-Calling Name Identification Restriction

COLP-Connected Line (Number) Identification Presentation

COLR- Connected Line (Number) Identification Restriction

CONP-Connected Name Identification Presentation

CONR- Connected Name Identification Restriction

Sending Alerting Name

CT-Call Transfer (by join)

CFU-Call Forwarding Unconditional (by join)

CFB-Call Forwarding Busy (by join)

CFNR-Call Forwarding No Reply (by join)

CFU-Call Forwarding Unconditional (by Reroute) - see Limitations Section

CFB-Call Forwarding Busy (by Reroute) - see Limitations Section

CFNR-Call Forwarding No Reply (by Reroute) - see Limitations Section

CCBS-Call Completion to Busy Subscriber - see Limitations Section

CCNR-Call Completion No Reply - see Limitations Section

ANF-PR-Additional Network Feature Path Replacement (for Call Transfer by join)

ANF-PR-Additional Network Feature Path Replacement (for Call Diversion by forward switching) - see Limitations Section

ANF-PR-Additional Network Feature Path Replacement (for Trombone connection)

MWI- Message Waiting Indication (lamp ON, lamp OFF)

Have alook at this document ans ee configuration for the callmanager side for QSIG.