7931 Features

Unanswered Question
Jul 23rd, 2008
User Badges:

Hi there !

I read 7931 have 24 buttons..

Are those buttons for monitoring only or is it possible to make them a speed dial button as well ?

Can they be both monitoring and SpeedDial in the same time ?

I did not find the Smartnet PN , witch one should I use ?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rob Huffman Wed, 07/23/2008 - 09:51
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Andrei,

Just as a "heads up" the 7931 is only supported on CME and CCM 6.x (I know last time we spoke you were running CCM 4.2 :)

If you are using the 7931 with CME then the Buttons can be programmed in Monitor Mode which is also a DSS/Speeddial to the Monitored DN.

The Part#'s are shown in this doc;


Hope this helps!



This Discussion