07-23-2008 09:37 AM
I want to remove all access points from CS and CM they are not on RME. what's the easy way to do that.
Solved! Go to Solution.
07-23-2008 10:17 AM
Choose Standard, and do not pick a device type.
07-23-2008 09:46 AM
Remove them from DCR. Go to Common Services > Device and Credentials > Device Management, and delete them from there. That will remove them from all LMS applications.
07-23-2008 09:53 AM
thank you so much J. same time how I can added WLSE on LMS.
07-23-2008 10:00 AM
Same location. Instead of clicking Delete, click Add, and input the details for the WLSE.
07-23-2008 10:07 AM
thank you so much...no words how much you did help me!!! what management(standard, CNS,auto or
cluster? chose for WLSE. removing those may be helping me my inode/ out of space issue temporarily.once
07-23-2008 10:17 AM
Choose Standard, and do not pick a device type.
07-23-2008 02:00 PM
I have Add WLSE and remove AP's. so now how I should setup AP not to be found again? how I can block AP not to add on DCR. Thanks
09-10-2008 08:36 PM
Hi jclarke
I have 41 devices that state in the Config Archive, they have failed to collect. I have 679 successfully connected devices. However when I click on the number of devices it brings a new window open showing 105 devices. I get the error
"SSH: Failed to establish SSH connection to xx.xx.xx.xx - Cause: Authentication failed on device 3 times. Failed to fetch config using RCP.Verify RCP is enabled or not. PRIMARY-STARTUP config Fetch Operation failed for TFTP. TELNET: Failed to establish TELNET connection to xx.xx.xx.xx - Cause: Authentication failed on device 3 times.
I have tried to remove them from Common Services, DFM and RME but they are not defined there. Is there a command line util I can use to delete items that are no longer on the network but installed in CiscoWorks. I am running LMS 3.0.1
09-10-2008 08:41 PM
No. In order to clean up stale config archive failure entries, you need to run a database query. You will need to contact TAC to help you with this.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide