IP Phone Connects to something while PSTN Phone is still ringing

Unanswered Question
Jul 23rd, 2008

When I place a call to one of my phones via the PSTN, the IP phone rings, and I answer it, it gives me every indication that the call is connected. Meanwhile, the PSTN phone is still playing ringing, it can take anywhere from 2-8 seconds for two way audio (or any audio at all) to actually be established. I understand this is because the IP leg of the call is outpacing the PSTN leg. I need my gateway (a 2801, ISDN-PRI,NI, h323) to not send the incoming call to Callmanager (4.2(3)es41) until the PSTN leg is ready to send audio. Can anyone tell me what command to issue (if there is one) to make this condition?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
swensonj Wed, 07/23/2008 - 14:14

Tried both of those, no luck on that. The document seems to describe the problem perfectly except for one thing, the IP phone user didn't place the call, it was the called number.


This Discussion