07-23-2008 06:03 PM - edited 03-03-2019 10:52 PM
Hi,
I am configuring to router connected with serial back to back and configuring one router with local-as no-prepend option but still i am seeing original AS number and loca-as configured AS number in the remote router bgp table. why?
regards
Devang Patel
Solved! Go to Solution.
07-23-2008 06:27 PM
Devang,
This is normal behavior. Try adding the replace-as keyword at the end of the local-as command.
Refer to the following documentation for more information:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t11/feature/guide/gtbgpdas.html#wp1053187
Regards,
07-23-2008 06:06 PM
Can you post config along with the BGP output?
__
Edison.
07-23-2008 06:27 PM
Devang,
This is normal behavior. Try adding the replace-as keyword at the end of the local-as command.
Refer to the following documentation for more information:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t11/feature/guide/gtbgpdas.html#wp1053187
Regards,
07-23-2008 10:05 PM
Hritter,
thanks for your reply... I have never noticed that one...
regards
Devang Patel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide