07-24-2008 07:14 AM - edited 03-15-2019 12:10 PM
Set up - MGCP GW connecting to either the Telco or TDM PABX,
Can someone confirm if you use MGCP on a GW that you still need a single Dial-Peer voice POTS with service mgcpapp configured pointing either to the PSTN or other TDM system. I thought when using MGCP you do not need Dial-Peers or is the dial-peer / service mgcpapp needed to route call calls from the PORT to the CCM telling the port is controlled by CCM
07-24-2008 07:20 AM
When using E1 or T1, you don't have Dial-peers. What you do is tell the controller to be "remote controlled" by mgcp, like this:
controller E1 0/0/0
pri-group timeslots 1-31 service mgcp
When using SRST, you need to configure dial-peers that take over when the connection to the CCM breaks.
07-24-2008 07:37 AM
Thanks that is what I thought but others have told me to add a voice pots 99901 and use the MGCPAPP commend on the dial-peer
07-24-2008 08:23 AM
usually you configure the dial-peers for analog interfaces controlled by MGCP but you can also create one for digital interfaces, it's not mandatory to create it
HTH
javalenc
if this helps, please rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide