models with two independent antennas

Unanswered Question
Jul 24th, 2008
User Badges:

Hello!Please help me to find a cisco wireless product that have two antennas modules on board which I can configure independently.I mean something like this:

#conf t

#int Dot11Radio0 0


#int Dot11Radio0 1

But I need that both can work on 2.4.Not one - 2.4 and another 5.0.

Thanks for any help.

p.s. I hope I said clear what I want.:(

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
bcolvin Thu, 07/24/2008 - 10:23
User Badges:
  • Bronze, 100 points or more


some old PROXIM/Lucent AP's had dual 2.4 radio capability. I am not aware of any Cisco products having that feature.


andrew.brazier@... Wed, 07/30/2008 - 04:17
User Badges:
  • Bronze, 100 points or more

AFAIK all Cisco APs come with a single 2.4Ghz radio. Those that accept external antenna have two antenna stubs but this is for diversity not to allow you to connect two different antenna for different purposes, ie; you can't connect a directional antenna to one stub and an omni to the other.

sergioser Wed, 07/30/2008 - 11:10
User Badges:

I understood,thanks.I had a task to change mikrotik router to cisco.mikrotik have the two radio cards.its simple for mikrotikOS.

thanks again.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode