cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
350
Views
0
Helpful
3
Replies

models with two independent antennas

sergioser
Level 1
Level 1

Hello!Please help me to find a cisco wireless product that have two antennas modules on board which I can configure independently.I mean something like this:

#conf t

#int Dot11Radio0 0

and

#int Dot11Radio0 1

But I need that both can work on 2.4.Not one - 2.4 and another 5.0.

Thanks for any help.

p.s. I hope I said clear what I want.:(

3 Replies 3

bcolvin
Level 3
Level 3

sergii

some old PROXIM/Lucent AP's had dual 2.4 radio capability. I am not aware of any Cisco products having that feature.

Bill

andrew.brazier
Level 4
Level 4

AFAIK all Cisco APs come with a single 2.4Ghz radio. Those that accept external antenna have two antenna stubs but this is for diversity not to allow you to connect two different antenna for different purposes, ie; you can't connect a directional antenna to one stub and an omni to the other.

I understood,thanks.I had a task to change mikrotik router to cisco.mikrotik have the two radio cards.its simple for mikrotikOS.

thanks again.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: