interface standby on CCM

Answered Question
Jul 24th, 2008
User Badges:

Hi all, is there a chance to configure some standby mode on two ethernet interfaces on CCM server, I mean to connect them to different switches and in case of link failure (for example because of switch failure) the standby interface would be able to retake connectivity? Thanks

Correct Answer by Rob Huffman about 8 years 10 months ago

Hi Thomas,


Just to add a link to the good info from Chris and Jaime. CCM 4.2(1) is good;


Using the Cisco Media Convergence Server Network Teaming Driver with Operating System Version 2000.4.4


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/win_os/driver/team_244.html


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Chris Deren Thu, 07/24/2008 - 09:07
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Yes, it is supported to configure NIC teaming in CallManager. What version of CM do you have?


Chris

Jaime Valencia Thu, 07/24/2008 - 10:05
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

just as a note this is only supported on HP servers


HTH


javalenc


if this helps, please rate

Correct Answer
Rob Huffman Thu, 07/24/2008 - 10:09
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Thomas,


Just to add a link to the good info from Chris and Jaime. CCM 4.2(1) is good;


Using the Cisco Media Convergence Server Network Teaming Driver with Operating System Version 2000.4.4


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/win_os/driver/team_244.html


Hope this helps!

Rob

Actions

This Discussion