Solved: interface standby on CCM

tprochazka · ‎07-24-2008

Hi all, is there a chance to configure some standby mode on two ethernet interfaces on CCM server, I mean to connect them to different switches and in case of link failure (for example because of switch failure) the standby interface would be able to retake connectivity? Thanks

Rob Huffman · ‎07-24-2008

Hi Thomas,

Just to add a link to the good info from Chris and Jaime. CCM 4.2(1) is good;

Using the Cisco Media Convergence Server Network Teaming Driver with Operating System Version 2000.4.4

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/win_os/driver/team_244.html

Hope this helps!

Rob

View solution in original post

Chris Deren · ‎07-24-2008

Yes, it is supported to configure NIC teaming in CallManager. What version of CM do you have?

Chris

tprochazka · ‎07-24-2008

I have 4.2(1)

Jaime Valencia · ‎07-24-2008

just as a note this is only supported on HP servers

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Rob Huffman · ‎07-24-2008

Hi Thomas,

Just to add a link to the good info from Chris and Jaime. CCM 4.2(1) is good;

Using the Cisco Media Convergence Server Network Teaming Driver with Operating System Version 2000.4.4

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/win_os/driver/team_244.html

Hope this helps!

Rob