07-24-2008 08:50 AM - edited 03-15-2019 12:10 PM
Hi all, is there a chance to configure some standby mode on two ethernet interfaces on CCM server, I mean to connect them to different switches and in case of link failure (for example because of switch failure) the standby interface would be able to retake connectivity? Thanks
Solved! Go to Solution.
07-24-2008 10:09 AM
Hi Thomas,
Just to add a link to the good info from Chris and Jaime. CCM 4.2(1) is good;
Using the Cisco Media Convergence Server Network Teaming Driver with Operating System Version 2000.4.4
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/win_os/driver/team_244.html
Hope this helps!
Rob
07-24-2008 09:07 AM
Yes, it is supported to configure NIC teaming in CallManager. What version of CM do you have?
Chris
07-24-2008 09:08 AM
I have 4.2(1)
07-24-2008 10:05 AM
just as a note this is only supported on HP servers
HTH
javalenc
if this helps, please rate
07-24-2008 10:09 AM
Hi Thomas,
Just to add a link to the good info from Chris and Jaime. CCM 4.2(1) is good;
Using the Cisco Media Convergence Server Network Teaming Driver with Operating System Version 2000.4.4
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/win_os/driver/team_244.html
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide