07-24-2008 11:54 AM - edited 03-11-2019 06:19 AM
I have an ASA 5505. I need to ping from the inside interface 10.xx.70.1 to the outside xx.xxx.120.115. I have IGMP inspect going but still can not ping anything on the outside.
Can some one help me fix this
Thanks
mike
Solved! Go to Solution.
07-25-2008 06:01 AM
Hi, Mike
Could you show the configuration.
I think it would the easiest way to help.
07-25-2008 06:05 AM
access-list group-in_1 extended permit icmp any any
07-24-2008 12:34 PM
Have you configured NAT for the internal subnet 10.xx.70.0 ?
07-25-2008 04:59 AM
Yes I have. Everything seems to be working I just can't ping from the inside to any device on the outside.
Mike
07-24-2008 04:49 PM
Hi,
I suggest to read the below article. It contains steps and configuration examples
07-25-2008 05:22 AM
Hello,
Thanks for the link. I have ICMP inspection tured on but when I ping I get
"Deny ICMP src inside 10.xx.180.5 dst outside xxx.xx.120.125 (type 8, code 0) by "access group-in_1" from the ASA.
Thanks
Mike
07-25-2008 06:01 AM
Hi, Mike
Could you show the configuration.
I think it would the easiest way to help.
07-25-2008 06:05 AM
access-list group-in_1 extended permit icmp any any
07-25-2008 12:42 PM
Thant did it thanks.
Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide