Catalyst Express 500 Series Switch Setup

Unanswered Question
Jul 25th, 2008
User Badges:

Good Morning,

I work for the Boy Scouts of America and a few days ago we had a lightning storm take out our Netgear 16 port switch. I have been able to get a WS-CE500-24LC. Trying to set this up and get it working so I can get our network back up is a little above my head.

My current network includes 13 wired ports, 1 Linksys access point, and 2 Zonet routers (I still have not been able to get them to act as access points).

For that matter I dont even know how to find the IP address of the switch to get into it to configure anything.

If anyone could help me out it would be greatly apprechiated.

Thank you,

Mike Di Domenico

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
mohammedrafiq Fri, 07/25/2008 - 07:58
User Badges:


Switch the sw on, when green light on set up led ( on right conner)will blink, press set up button then, when sw port led blinks green(1st port on sw).

Connect your PC to this port.

when port light goes green from orange, launch Web browser ( you might have to launch severl time by closing , and reoping it.)

in brower, set up window appear, here on GUI you can set up ip and other settings.

Hope it helps


mightymouse3062 Fri, 07/25/2008 - 09:18
User Badges:

I have a feeling that this switch has been configured before and that is the reason I can not get to the GUI. How would I do a master reset or get into it?


This Discussion