One way audio during a meet-me conference

Unanswered Question
Jul 25th, 2008
User Badges:

Hello,


I have CUCM 6.1 and have setup the meet-me conference numbers and also some outside DID's translated to the meet-me numbers. When I setup the conference from inside it works fine but when a user calls in from the outside they join the conference but I cannot hear them. They can hear me fine from the outside but I cannot hear them from the inside. Any help is appreciated.


Thanks!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Fri, 07/25/2008 - 17:48
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

first thing i'd look at, would be routing, make sure the CFB can reach the GW so the RTP is routed correctly


HTH


javalenc


if this helps, please rate

scottm65 Mon, 07/28/2008 - 07:39
User Badges:

The CFB can reach the gateway and shows registered in CM. I am not sure if there is something else I should check?? Thanks for your help!


Scott

Actions

This Discussion