07-25-2008 11:54 AM - edited 03-06-2019 12:28 AM
Someone deleted the IOS off the switch and power cycled the switch. Now it comes up with the prompt switch: and when I do a dir flash: it does not have an IOS image. How can I copy a image through the console? or can I?
Mike
Solved! Go to Solution.
07-25-2008 12:00 PM
Mike,
You can use xmodem to copy an IOS to the flash using your console cable. It is a pretty simple process, and quick if you change the baud rate to 115200. Here are some step by step instructions for your recovery.
Mark
07-25-2008 12:00 PM
Mike,
You can use xmodem to copy an IOS to the flash using your console cable. It is a pretty simple process, and quick if you change the baud rate to 115200. Here are some step by step instructions for your recovery.
Mark
07-25-2008 12:15 PM
Thank you....that is exactly what I was looking for.
Mike
07-28-2008 03:28 AM
Worked perfectly. Thanks for your help.
Mike
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: