Conference Phone 7937 stuck on "Configuring IP"

Unanswered Question
Jul 26th, 2008

Hi !

I have two 7937 conference phone here, and when I plug them, the screens shows "Configuring IP" undefinitely. If I press the Application button and check the network settings, I can see that it grabbed its IP from the DHCP server properly ...

Any idea why both phones would stuck there ?

I've factory-reset the phones already.

Thanks !

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Chad Stachowicz Sat, 07/26/2008 - 13:41

Are they your only 7937? What vesion is your CCM? I imagine that you need to upload the firmware onto the CCM..


olivier.bedard Sat, 07/26/2008 - 13:53

yeah, these are our first two 7937.

We are using CallManager Express 4.3

I have that configured:

tftp-server flash:apps37sccp.1-2-1-0.bin

and under telephony-service:

load 7937 apps37sccp.1-2-1-0

however, debug tftp events shows nothing when I plug the 7937


olivier.bedard Sat, 07/26/2008 - 18:11

Cisco IOS Software, 3800 Software (C3845-SPSERVICESK9-M), Version 12.4(15)XZ, RE


Technical Support:

Copyright (c) 1986-2008 by Cisco Systems, Inc.

Compiled Fri 11-Apr-08 21:53 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)


This Discussion