Called id not displaying on SIP trunk

Unanswered Question
Jul 27th, 2008
User Badges:

I ve a SIP trunk to CME.

When I call from CME to CM ,i can see "to called name";for example "to Ahmed"


the opposite not like that;i can see "to 1000"

NO name is displying even after call is estaplished.

I put the following parameters to allowed on SIP trunk on inbound & outbound calls:

Connected Line ID Presentation*

Connected Name Presentation*

I need to display on caller LCD screen "to called name"

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Chad Stachowicz Sun, 07/27/2008 - 21:13
User Badges:
  • Silver, 250 points or more


The alerting name is a field that is local and used within the CCM, once you go out to a CME or intercluster, they aren't going to work. You need to setup directory services in CME using the 'directory entry' command on the side of the CME. It's a pain, but its the best I know how.

HTH, please rate useful posts.


youssef.ahmed Tue, 07/29/2008 - 11:32
User Badges:

Hi Chad,

But why it is working if i make a h323 trunk to CME through GK??

Actually I can't got yuor point regarding "directory entry" in CME.

Plz describe in more details.



This Discussion