MGCP and H323 Protocols on Same Gateway

Answered Question
Jul 28th, 2008
User Badges:

Dear Folks,

Can we enable both MGCP and H323 on same gateway.meaning that MGCP will use for PRi and H323 for analog Ports.

Also Please give any stable IOS for MGCP.

Thanks in Advance

Correct Answer by Jaime Valencia about 8 years 10 months ago

yes, you can use both protocols on the same GW, this has been asked twice over the past 2 weeks, please try searching on previous posts


HTH


javalenc


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Mon, 07/28/2008 - 06:10
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

yes, you can use both protocols on the same GW, this has been asked twice over the past 2 weeks, please try searching on previous posts


HTH


javalenc


if this helps, please rate

matthubach Tue, 04/08/2014 - 08:56
User Badges:

Possible/Advisable to share the same circuit between MGCP/H323 protocols on the same gateway?

Jaime Valencia Tue, 04/08/2014 - 11:04
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Not possible, you need to choose one and stick to it per circuit.

ie 0/0/0 MGCP

0/0/1 H323

Actions

This Discussion