AIM-IPS bootloading problem

Unanswered Question
Jul 29th, 2008

Hi

I have a problem to initialize AIM-IPS.

I'm thinking it's problem with BOOTLOADER FILE.

ROUTER#service-module ids-Sensor 0/0 session

[Resuming connection 2 to 10.1.9.1 ... ]

ServicesEngine MFG Failsafe boot-loader > show

IP addr: 10.1.9.2

Netmask: 255.255.255.0

TFTP Server: 10.1.9.1

GW IP adr: 10.1.9.1

eth int: octeth1

Number cores: 2

Default boot: disk

MFG Failsafe Bootloader Version: 1.1.7

Failsafe Bootloader File: pse_mfg_failsafe_1.1.7.bin

Default Bootloader File:

MiniKernel: mini_kernel_1.1.7.64.bz2

ServicesEngine MFG Failsafe boot-loader >

I can't find DEFAULT BOOTLOADER FILE on Cisco's site.

In documentation I found informaction:

http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_obtaining_software.html

Bootloader As needed bl AIM-IPS pse_aim_x.y.z.bin (where x, y, z is the release number)

Can anybody help me ?

Peter

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion