CM Group list contains 5 records

Unanswered Question
Jul 29th, 2008
User Badges:


Hi,


Have a curious question.


Call Manager/Communications Manager Group can be populated with up to 3 (three) Call Managers.

While I'm using IP Phone menu 'Settings | Device Configuration | CallManager Configuration',

I can see that the resulting list contains 5 (five) records.


What for there is 5 records, if the maximum CM Group quantity cannot run over 3 records ?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (2 ratings)
Loading.
csco11063007 Tue, 07/29/2008 - 06:03
User Badges:

Hi,


I think ,First 3 Point to the Callmangers in the subscribed CCM group ,4 th one point to the tftp server where it will register if these 3 callmanagers are unavailable and last (5th) always point to the srst reference.



HTH



Ayodeji Okanlawon Tue, 07/29/2008 - 07:47
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Csco11063007,


Phones do not register with TFTP server!


The first 3 points to your callmanager, the 4th onw will show your srst refrence if its configured, the 5th is not used.


Someone told me that you can have 2 srst reference, I have not confirmed this. So I stick with the theory that the 5th is not used.

csco11063007 Tue, 07/29/2008 - 11:17
User Badges:

Please check this useful document

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7970g_7971g-ge/english/3_3_3/english/administration/guide/HEADset.html


Check following paragraph in the same document:Device Configuration Menu

The Device Configuration menu provides options for viewing and making a variety of settings that are not network related. Table 4-2 describes these options and, where applicable, explains how to change them.


For information about how to access the Device Configuration menu, see the "Displaying a Configuration Menu" section.



Actions

This Discussion