I attempted to update my CUE to 3.2.1 but it failed while downloading the language package. Now tf fails to boot with the following
Welcome to Cisco Service Engine
Mon Apr 21 07:53:00 EDT 2008
********** rc.aesop ****************
Populating resource values from /etc/aim_rsrc_file
Populating resource values from /etc/default_rsrc_file
Populating resource values from /etc/products/cue/default_rsrc_file
entry : change cli_server:standalone:int32:0
Populating resource values from /etc/products/cue/aim_rsrc_file
lcp: .3 COMPLETED
lcs: .3 STARTED
main sub_phase: 3
nsp phase_file: /bin/installer_phase_steps
It just hangs here. I have attempted to use the boot helper option but the TFTP connection opens and drops a few seconds after that. Is there anything else I can try at this point? Is there another way to get things reset?
Try downloading the boot helper to the router flash and TFTP'ing off the router directly. I've seen the CUE have issues with loading the boot helper across the network on occassion.
If you can get the boot helper to load, try the disk cleanup option.