Cannot connect using Cisco VPN client

Answered Question
Jul 29th, 2008
User Badges:

Hi all.I have recently configured an ASA 5510 to allow remote access using Cisco VPN client. The problem is that everything works fine when I connect using a classic modem or over a machine with a public address that I use for testing purposes but whenever I try to connect with over an ADSL line I cannot gain access to the resources. I login and after that nothing, I can't reach anything.

I'm attaching the relevant configuration information in the attachment.All help is most welcome.



Attachment: 
Correct Answer by acomiskey about 8 years 11 months ago

Depending on version, add..


isakmp nat-traversal


or


crypto isakmp nat-traversal


Should be all you need.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
acomiskey Tue, 07/29/2008 - 12:14
User Badges:
  • Green, 3000 points or more

Depending on version, add..


isakmp nat-traversal


or


crypto isakmp nat-traversal


Should be all you need.

IgorHamzic Tue, 07/29/2008 - 12:40
User Badges:

Thanks that did it. I can ping and access resources without problem.

Actions

This Discussion