07-29-2008 11:47 AM - edited 02-21-2020 03:51 PM
Hi all.I have recently configured an ASA 5510 to allow remote access using Cisco VPN client. The problem is that everything works fine when I connect using a classic modem or over a machine with a public address that I use for testing purposes but whenever I try to connect with over an ADSL line I cannot gain access to the resources. I login and after that nothing, I can't reach anything.
I'm attaching the relevant configuration information in the attachment.All help is most welcome.
Solved! Go to Solution.
07-29-2008 12:14 PM
Depending on version, add..
isakmp nat-traversal
or
crypto isakmp nat-traversal
Should be all you need.
07-29-2008 12:14 PM
Depending on version, add..
isakmp nat-traversal
or
crypto isakmp nat-traversal
Should be all you need.
07-29-2008 12:40 PM
Thanks that did it. I can ping and access resources without problem.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: