Caller id on CME according to call type

Answered Question
Jul 29th, 2008

How i can change caller id on CME 3.3 according to call type( local,international,...)

I have this problem too.
0 votes
Correct Answer by Chad Stachowicz about 8 years 5 months ago

youssef,

no it doesn't you cannot do masking with this as far as I know, hence the translation profile, its dynamic.

HTH, also people like to show appreciation on these forums by rating things that they find useful or solved their problems..

Chad

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
youssef.ahmed Tue, 07/29/2008 - 14:56

I need it to be dynamic caller id;

e.g. 1234XXXX (to represent internal phone number)

Chad Stachowicz Tue, 07/29/2008 - 17:54

under each dial-peer on the CME corresponding to your loca / LD / intl route use a translation pattern on the calling number.

voice-translation rule 1

rule 1 /\(1234\)/ /8099\1/ = 80991234

voice-translation profile CLID

translate calling 1

dial-peer voice 1000 pots

Description ***Long Distance***

destination-pattern 91[2-9]..[2-9]......

translation-profile outgoing CLID

port 0/0/0:23

forward digits 11

HTH, please rate useful posts!

Chad

Correct Answer
Chad Stachowicz Wed, 07/30/2008 - 06:19

youssef,

no it doesn't you cannot do masking with this as far as I know, hence the translation profile, its dynamic.

HTH, also people like to show appreciation on these forums by rating things that they find useful or solved their problems..

Chad

Actions

This Discussion