Minium Router that supports Multi VPN

Unanswered Question
Jul 29th, 2008
User Badges:

I have a Cisco 5510 at our HQ with 4 Cisco 857 routers connected to the HQ from the sub branches and appear not to be able to configure multi vpns between the offices for Exchange routing. Am I doing this properly or will this work with the hardware I have?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Matthew,


From the picture you provided - you appear to be using the same IP subnet in 3 locations is this correct?


As without subnetting the 10.0.2.x range into smaller ip ranges - the only other option I can think of is bridging over a GRE tunnel in a VPN to be able to run the same IP range in 3 locations.


HTH>

matman140 Wed, 07/30/2008 - 16:53
User Badges:

Andrew


I am running seperate subnets


HQ 10.0.0.0

sub 1 10.0.1.0

sub 2 10.0.2.0

sub 3 10.0.3.0

sub 4 10.0.4.0





Actions

This Discussion