RME 3.5 - Not Responding device

Unanswered Question
Jul 29th, 2008
User Badges:

Hi, there are some devices in my RME Not responding device list.


I telent to those devices and find read/write community is ok, but the "write community acccess-list counter" does not have any match.


My openveiw operator also give me complain for those devices - those devices can not be queried sometimes


Are there any IOS bug report for the following IOS ?


c1700-ipbase-mz.123-14.T7.bin

c1700-ipbase-mz.123-14.T7.bin

c1700-ipbase-mz.123-14.T7.bin

c1700-ipbase-mz.123-26.bin

c1700-k9o3sy7-mz.123-14.T7.bin

c1700-y7-mz.124-4.T.bin

c1700-y-mz.123-20.bin

c1700-y-mz.123-22.bin

c1700-y-mz.123-22a.bin

c1700-y-mz.123-22a.bin

c2801-ipbase-mz.124-1c.bin


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Wed, 07/30/2008 - 07:24
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

You should try and troubleshoot this further. Start a sniffer trace filtering on udp/161 traffic to one of the not responding devices. Then resubmit that device. On the device, try running debug snmp packet. Check the sniffer trace to make sure RME is sending the correct community string information, and check the debug output to make sure the packets are making it to the device.

Actions

This Discussion