Installing device packs on cucm 6- has it changed?

Answered Question
Jul 30th, 2008
User Badges:
  • Silver, 250 points or more

I recently uploaded a device pack on CUCM 6 to add a new phone type , I `ve done this before on 4.x and 5.x . On 4.x when you install the pack, you can instruct CUCM to install the new phone loads in to TFTP only but do not update the device defaults so you can manually control when you wish to update the phones, this was also the case on 5.x though it was not as obvious however on 6.x this seems to have disappeared. We have installed a device pack on two different CUCM 6.0 and on both occasions it updated all the phone loads in the device defaults without the option - has the process changed now or did I miss something ?



thanks

Correct Answer by Jaime Valencia about 8 years 12 months ago

6.x won't ask you for that, it will change firmware of device defaults if included in the DevPack


HTH


java


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Wed, 07/30/2008 - 05:19
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

6.x won't ask you for that, it will change firmware of device defaults if included in the DevPack


HTH


java


if this helps, please rate

iptuser55 Wed, 07/30/2008 - 06:01
User Badges:
  • Silver, 250 points or more

So it is working as per , any idea why was it changed?

Jaime Valencia Wed, 07/30/2008 - 06:12
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

not really =(


probably has to do with the fact that now we're trying to lock down everything and give less options to avoid failures


HTH


java


if this helps, please rate

Actions

This Discussion