Guys - could you take a quick look at this config and let me know what I'm missing out.
I've included the diag and config. Basically the 2821 is acting as a hub and 2 spokes ( 3 if you include the dsl connection when its configured )
The first spoke is connected to an existing Verizon network and the second spoke to the BT network
Customer wishes to send existing VPN traffic over Verizon, SMTP over BT and everything else over the DSL.
The issue that I have is that I cannot get the routing policy to do this, but I do see traffic going across the interfacesâ¦. Is there anything obvious that comes to mind ?
From the c2821 I have visibility of both devices when I sh cdp nei and ping the open interfaces. Verizon have blocked pings and some icmp traffic in their int. but the BT interfaces are open.
I also have visibility of both networks from the customer LAN behind the firewall
The 2821 has a HWIC-4ES - I cannot config them directly as routed interfaces without creating VLANs on the WAN side.
Any suggestions to what I might be missing would help me a lot - Thanks in Advance, S