NTP synch using XNTP

Unanswered Question
Jul 30th, 2008
User Badges:

Hi,


The following link states that XNTP enables NTP client only and it cannot serve as Server, so you cannot synch TO it.


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008009470f.shtml


I am running XNTP on all Call Manager servers and all subscribers are pointing AND successfuly synching with the publisher using XNTP.


I had also tested it by pointing Cisco router to the publisher as NTP server and it all works.


So, is this document inaccurate?


Thanks,

David

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Tue, 08/05/2008 - 08:59
User Badges:

This document is correct. Cisco IP Telephony servers can synchronize their clocks with either an external network time server using X Network Time Protocol (XNTP) or between Cisco CallManagers using various Windows utilities. It is not possible to configure the Cisco CallManager Server as a NTP Server as a Cisco CallManager Server can only act as a client.

Actions

This Discussion