07-30-2008 11:28 AM - edited 03-03-2019 10:57 PM
I have 1:1 Internet link. I need to connect to VWIC2-2MFT-G703 card and how to configure the VWIC2-2MFT-G703 card in 2821 Router? I have public ip address, whether its possible to configure in VWIC2-2MFT-G703 card? please help me to solve this issue.
07-30-2008 03:18 PM
Hello,
See the below link it has detailed info about concerning how to configure the card.
http://www.cisco.com/en/US/docs/ios/12_2/12_2z/12_2zj/feature/guide/gthwecan.html
Hope this helps,
Regards,
07-30-2008 06:10 PM
Hi,
I have enabled the controller and serial interface. Please help me how to configure the E1 Internet link. I have tried to configure the controller and serial interface, the status shown me as Serial0/0/0:0 is down, line protocol is down.
& controller E1 0/0/0 is down. Find the configuration below,
controller E1 0/0/0
framing NO-CRC4
clock source internal
channel-group 0 timeslots 1-31
description **** Internet Link ****
interface Serial0/0/0:0
description **** Internet Link ****
ip address 125.10.5.10 255.255.255.252
no ip proxy-arp
07-31-2008 07:51 AM
Can you please send me the output of "show controller e1 0/0/0"
thanks,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: