weird 1130 issue

Unanswered Question
Jul 30th, 2008
User Badges:

Somehow the enable pw got messed up in one particular AP and now I can't get back into it.

Its running LAP IOS but is not associated to any controller.

I've attempted to press/release the MODE button until it turned both amber and red but it still won't fully default its configuration to factory settings.

There is no longer a static IP (I can get in unpriveleged) but it keeps the name and whatever enable pw it has among a few other things.

Am I going to have to do the direct connect TFTP IOS loadup option?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Scott Fella Tue, 08/05/2008 - 15:50
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Try this:

First, check the flash:


Directory of flash:/

2 -rwx 279 May 09 2008 11:52:20 +00:00 env_vars

4 -rwx 6168 May 09 2008 11:52:20 +00:00 private-multiple-fs

6 drwx 256 May 09 2008 11:49:05 +00:00 c1130-k9w8-mx.124-3g.JA2

5 drwx 128 Mar 01 2002 00:03:43 +00:00 c1130-rcvk9w8-mx

15998976 bytes total (10716672 bytes free)

Then delete the LWAPP image:

lap_1131#delete /r /f flash:/c11310-k9w8-mx.124-3g.JA2

Not the one the has rcv in it!!!!!!

Thirdly reload the AP:


Then issue a clear lwapp private-config

You'll end up with a clear AP.

js88888888 Mon, 08/11/2008 - 13:45
User Badges:

Thanks! I saw your post on this solution earlier, or maybe someone else's. Easy fix.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode