07-30-2008 02:06 PM - edited 07-03-2021 04:15 PM
Somehow the enable pw got messed up in one particular AP and now I can't get back into it.
Its running LAP IOS but is not associated to any controller.
I've attempted to press/release the MODE button until it turned both amber and red but it still won't fully default its configuration to factory settings.
There is no longer a static IP (I can get in unpriveleged) but it keeps the name and whatever enable pw it has among a few other things.
Am I going to have to do the direct connect TFTP IOS loadup option?
08-05-2008 03:50 PM
Try this:
First, check the flash:
lap_1131#dir
Directory of flash:/
2 -rwx 279 May 09 2008 11:52:20 +00:00 env_vars
4 -rwx 6168 May 09 2008 11:52:20 +00:00 private-multiple-fs
6 drwx 256 May 09 2008 11:49:05 +00:00 c1130-k9w8-mx.124-3g.JA2
5 drwx 128 Mar 01 2002 00:03:43 +00:00 c1130-rcvk9w8-mx
15998976 bytes total (10716672 bytes free)
Then delete the LWAPP image:
lap_1131#delete /r /f flash:/c11310-k9w8-mx.124-3g.JA2
Not the one the has rcv in it!!!!!!
Thirdly reload the AP:
lap_1131#reload
Then issue a clear lwapp private-config
You'll end up with a clear AP.
08-11-2008 01:45 PM
Thanks! I saw your post on this solution earlier, or maybe someone else's. Easy fix.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: