Access Cisco Unity Express (CUE) Voicemail from outside

Unanswered Question
Jul 31st, 2008
User Badges:

I need help to configure access to CUE mailbox from road users. I have a standard install of CCME (v4) and CUE (v3.1). Any notes or ideas? All users currently have access to voicemail in

the office. I have a 10 channel isdn30 pri for PSTN breakout.

thanks in advance.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Thu, 07/31/2008 - 05:39
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Naushad,



You can have either a separate (dedicated) PSTN number for this specific purpose (which is routed to the voice mail pilot number), or these calls can use your main business number (and therefore terminate on the AA). If you choose to terminate calls at the AA, you must redirect calls to voice mail via the AA menu by dialing the voice mail pilot number as an extension.


If a subscriber wants to call in to check voice mail from any off-net location (such as home or a cell phone) and to be presented only with the PIN login menu (and not the User ID followed by PIN login menu), then Cisco Unity Express must recognize the caller ID delivered with the PSTN call and be able to map that to a mailbox on the system. This call flow requires the following:


•The PSTN must deliver caller ID to your location.


•You must associate a secondary number (the PSTN phone number) with the mailbox in addition to the extension.


You can associate a secondary number with a Cisco Unity Express mailbox by setting the Primary E.164 Number field in the user's profile to this number


From this excellent CUE doc;


http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/design/design21/cuevmdes.html#wp1008337


Hope this helps!

Rob

Actions

This Discussion