07-31-2008 04:28 AM
Hi there...
My computer keeps loosing the connection to the nodes in CTC, both the local node and the remote node.
I'm using JRE version 1.6.0_07 and CTC is version 8.5.1.
Anyone who has any ideas?
08-06-2008 01:04 PM
Might be communication interuption between the card and client. Reboot the device and try again it will resolve.
08-11-2008 05:34 AM
I had same problem ... in my case I used the following solution:
--------------------------------------------
It's a network problem.
You have a firewall into your network.
You need to go from CTC on network parameters (provisioning --> network) and setup:
Enable SOKCS proxy
SOCKS proxy only.
This should work, but take care about your network topology.
E.G.: if you have some other host NOT 15454 connected to your network it's possible that you lost them.
--------------------------------------------
So try it ... maybe, it will solve your problem ... Regards Radim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide