I am trying to setup the following VTP domains up and get them able to communicate and route.
I have a Main site we will call main and it has a VTP domain called Main. Next we have a site called DR and it has a VTP domain called DRMain
Here are the VLANS defined in the VTP domain called main...
ip address 10.10.1.3 255.255.255.0
ip address 10.10.3.1 255.255.255.0
Here are the VLANS defined in the VTP domain called DRMain....
ip address 10.99.1.3 255.255.255.0
ip address 10.99.3.1 255.255.255.0
See attachment for the network layout and setup.
What I would like to be able to do is have a physical server at the DR site (on drawing ESX Server) with an IP address of 10.99.3.10 and then have virtual servers on that box that have IP addresses in the main VTP domain such as 10.10.3.30 and 10.10.3.31 and be able to communicate with both the VTP domains from these servers. What would be the best way to make this work?