20 Trunks, 2 PRI in 2800

Answered Question
Jul 31st, 2008
User Badges:

hi; according to a requirement i am in need to offer 20 trunks(5*4FXO)and(1*VWIC-2MFT-E1); how can i place it using 4 WICs and 1 NM present in 2811...

If not possible than kindly suggest alternatives

Correct Answer by Chris Deren about 8 years 9 months ago

I would recommand to place 4 of the FXOs into the HWIC slots and get NM-HDV2-2T1/E1 which has onbard VWIC2-2MFT-E1 card and one open VIC slot that you can use for the 5th FXO.

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008039c333.shtml


HTH,


Chris

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Chris Deren Sat, 08/02/2008 - 11:06
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

I would recommand to place 4 of the FXOs into the HWIC slots and get NM-HDV2-2T1/E1 which has onbard VWIC2-2MFT-E1 card and one open VIC slot that you can use for the 5th FXO.

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008039c333.shtml


HTH,


Chris

Actions

This Discussion