Unanswered Question
Jul 31st, 2008
User Badges:

Dear sir,

iam having 2821 router in that we inistalled and configured isdnbri its working and iam getting the fallowing error

Jul 31 10:39:26.231: ISDN BR0/0/0 EVENT: process_rxstate: ces/callid 1/0x33 calltype 1 HOST_INCOMING_CALL

*Jul 31 10:39:26.235: ISDN BR0/0/0 EVENT: host_incoming_call: call_id 0x0033, Guid = C7F1B57B8030 bchan 0

*Jul 31 10:39:26.235: ISDN BR0/0/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1: b channel 0, call id 0x33

*Jul 31 10:39:26.235: ISDN BR0/0/0 EVENT: process_rxstate: ces/callid 1/0x33 calltype 1 HOST_DISCONNECT_ACK

plz can i get what this eeor.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
lamav Fri, 08/01/2008 - 04:42
User Badges:
  • Blue, 1500 points or more

You probably have something misconfigured.


switch type


spids, if they apply

number you're dialing


Go to Ciscos website and read how you should be configured.

Richard Burts Fri, 08/01/2008 - 08:50
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN


Perhaps I am a bit confused. In the beginning of your post you seem to say that the BRI is working. But then you post error messages that show that it is not working. Is the BRI working for some calls but not for others? Or is it failing on all calls?

The suggestion from Victor to check on the Cisco website is worthwhile. If you check the website and still do not find an answer then I would suggest that it might be helpful if you would run debug isdn q931 and post the output from that when a call fails.




This Discussion