cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
267
Views
0
Helpful
1
Replies

Configuration of SIP DTMF with a CUCM 6.1

aessonel2008
Level 1
Level 1

Hi all,

We are facing a problem with the interconnection between GSM voice gateway and a CUCM 6.1 server. One of our call center number is a GSM number; so we put a GSM sim card in a GSM voice gateway; but when you dial that number you have the welcome prompt and when you dial 1 for French or 2 for English and the CUCM does not interpret this digit. We created a SIP trunk between the GSM voice gateway and the call manager. Is that the correct procedure or do we need to go through a Cisco Voice gateway? Can someone send the procedure of how do this configuration?

Thanks,

1 Reply 1

irisrios
Level 6
Level 6

CCM 6.x is recommended to keep MTP Required check box disabled. SIP end users can not receive calls from ip phones connected to CCM 6.1.

Configuring SIP DTMF Features

http://www.cisco.com/en/US/docs/ios/12_3/sip/configuration/guide/chapter8.html

SIP DTMF Features per IOS release:

http://www.cisco.com/en/US/docs/ios/12_3/sip/configuration/guide/sipftgde.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: