Downloading pix 515e image 6.3(3) image to tftp

Unanswered Question
Aug 1st, 2008
User Badges:
  • Bronze, 100 points or more

Hi Experts,

Can anyone tell me how can i get the backup of image 6.3(3)on pix 515e by using tftp server.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
JORGE RODRIGUEZ Fri, 08/01/2008 - 10:46
User Badges:
  • Green, 3000 points or more

You can backup the config but not the code, this applies for anything up to 6.3.5, this is now different with 7.x and above where you can backup code from pix/asa to tftp server.



Anonymous (not verified) Fri, 08/01/2008 - 20:52
User Badges:

Hi Jorge,

Thanks a lot.

I tried a lot but could not backup the image.

Thanks for guiding me.


Regards

Mukesh

JORGE RODRIGUEZ Sat, 08/02/2008 - 06:46
User Badges:
  • Green, 3000 points or more

Mukesh, you're welcome.


Since in pix 6.x you cannot backup the code to tftp you may download the actual code from cisco pix/asa download file area, of course that is if you have access to download area. You can then save the actual code that is currently running in your PIX to your tftp server.


You may also consider down the road upgrade the firewall code to 6.3.5 and save the code in safe place, or upgrade to 7.x if you have PIX515 or above model.



Rgds

Jorge

Actions

This Discussion