08-01-2008 10:07 AM - edited 03-11-2019 06:24 AM
Hi Experts,
Can anyone tell me how can i get the backup of image 6.3(3)on pix 515e by using tftp server.
08-01-2008 10:44 AM
not possible
08-01-2008 10:46 AM
You can backup the config but not the code, this applies for anything up to 6.3.5, this is now different with 7.x and above where you can backup code from pix/asa to tftp server.
08-01-2008 08:52 PM
Hi Jorge,
Thanks a lot.
I tried a lot but could not backup the image.
Thanks for guiding me.
Regards
Mukesh
08-02-2008 06:46 AM
Mukesh, you're welcome.
Since in pix 6.x you cannot backup the code to tftp you may download the actual code from cisco pix/asa download file area, of course that is if you have access to download area. You can then save the actual code that is currently running in your PIX to your tftp server.
You may also consider down the road upgrade the firewall code to 6.3.5 and save the code in safe place, or upgrade to 7.x if you have PIX515 or above model.
Rgds
Jorge
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide