08-01-2008 10:37 AM - edited 03-06-2019 12:34 AM
Hi...
I have 6 VLANs on my netowrk... and 2 core switches (4506).
I've configured the first core to be the root primary and HSRP Active for the VLANs 10, 20 and 30.
And I've configured the second core to be the root primary and HSRP Active for the VLANs 40, 50 and 60.
But now... I dont know what should be the STP configuration of the layer 2 switches...
How should be the configuration?
Thanks
08-01-2008 11:07 AM
Follow Cisco's best practices.
http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a0080094713.shtml#stp
You should also have an understanding of what STP is and what features are offered.
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_configuration_example09186a008009467c.shtml
There's way too much too get into detail right now.
Read these docs.
HTH
VL
08-01-2008 12:23 PM
Reading the docs, I understand that I must say what are the root switches on my netowrk...they will be my core switches...
So...i think I dont need do anything on the layer 2 siwtches, because, they will know who are the roots...
Am I pointed to the right way?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: