08-01-2008 11:45 AM - edited 03-10-2019 04:13 AM
testing connectivity after adding a IPS 4240 to the Mars gives an error: PN-0001:PnLogger message map not initialized. This seems to have an issue with the setup of communication using https, but I can https to the IPS from other stations.
Solved! Go to Solution.
08-01-2008 12:25 PM
If your sensor is 6.1 then this is a cosmetic issue. 6.1 is not officially supported. Have a look at this thread:
Please rate if helpful.
Regards
Farrukh
08-01-2008 11:51 AM
Try adding the trusted key of the MARS in IPS. Make sure MARS is added in the access-list of permitted IPs on the sensor (a simple way to test this is to ping the sensor from the MARS cli).
Regards
Farrukh
08-01-2008 11:55 AM
the MARS is in place as a trusted host certificate.
08-01-2008 11:58 AM
Double check your login credentials entered in MARS, check the ACL, try deleting and re-adding the sensor in MARS.
Regards
Farrukh
08-01-2008 12:07 PM
I have tested the login credentials by logging into the IDM successfully from my laptop.
The ACL has the MARS IP address specifically allowed.
I have already deleted and re-added the device.
From the CLI of the MARS:
[pnadmin]$ telnet 172.16.155.253 443
Trying 172.16.155.253...
Connected to 172.16.155.253.
Escape character is 'off'.
This then will timeout. But it appears the connection occurs.
thanks in advance for your assistance.
08-01-2008 12:22 PM
Do one thing, just simply ignore the 'test connectivity' bit and let the IPS sensor be added to MARS. Then see if you receive events from it.
Regards
Farrukh
08-01-2008 12:25 PM
If your sensor is 6.1 then this is a cosmetic issue. 6.1 is not officially supported. Have a look at this thread:
Please rate if helpful.
Regards
Farrukh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: