asa/fwsm context

asim.mz99 · ‎08-03-2008

do asa or fwsm support context in a way 1 used for routed and the other one for transparent.

Also do fwsm support DMZ in transparent mode.

andrew.prince · ‎08-03-2008

Have a look at the below links for all information required:-

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808d2b63.shtml

http://www.cisco.com/en/US/docs/security/fwsm/fwsm22/configuration/guide/context.html#wpxref83745

HTH>

dhananjoy chowdhury · ‎08-03-2008

Hi,

With the introduction of FWSM 3.1, mixed-mode operation is also supported. This allows the capability to have both transparent and routed contexts operate simultaneously on the same FWSM.

http://www.cisco.com/en/US/docs/security/fwsm/fwsm31/configuration/guide/fwmode_f.html#wp1220586

dhananjoy chowdhury · ‎08-03-2008

For your second query

"do fwsm support DMZ in transparent mode.",

>> No, because each bridge group can have only once inside and one outside interface.

http://www.cisco.com/en/US/docs/security/fwsm/fwsm31/configuration/guide/fwmode_f.html#wp1220271

Hope this helps.