phone license

Unanswered Question
Aug 3rd, 2008
User Badges:

hi

i have CME implemented in three sites where we are using around 150 phones, which i am going to make as CCM centralized architecture. so what should i do for the license to be converted to get used in CCM


please help me

its very urgent


thanks in advance........

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Sun, 08/03/2008 - 11:54
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Mohamed,


Your investment in CME phones will be protected;


Q. I have a Cisco Unified CallManager Express (CME) customer who wishes to upgrade to Cisco Unified CallManager 5.1. What steps do I need to follow to ensure the licensing transfers?


A. Do the following:


1. Determine how many and what type of devices are on the customer's Cisco Unified CME.


2. Enter the quantity of each device in the "yellow" cell in the Cisco Unified CallManager Device License Unit Calculator pasted at the end of this document.


3. Contact [email protected] with the MAC address of the publisher and the number of device license units calculated in step 2. The customer does not need a node license-it comes with the new Cisco Unified CallManager.


From this excellent licensing doc;


Cisco Unified CallManager Licensing


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item0900aecd805a7062.shtml



Here is the DLU breakdown;


Cisco Unified IP Phone 7902G = 1


Cisco Unified IP Phone 7905G = 2


Cisco Unified IP Phone 7911G = 3


Cisco Unified IP Phone 7912G = 3


Cisco Unified Wireless IP Phone 7920 (no battery) = 4


Cisco Unified IP Conference Station 7936 = 3


Cisco Unified IP Phone 7940G = 4


Cisco Unified IP Phone 7941G = 4


Cisco Unified IP Phone 7941G-GE = 4


Cisco Unified IP Phone 7960G = 4


Cisco Unified IP Phone 7961G = 4


Cisco Unified IP Phone 7961G-GE = 4


Cisco Unified IP Phone 7970G = 5


Cisco Unified IP Phone 7971G = 5


Cisco Unified IP Phone 7985G = 6


Third-party SIP device (basic) = 3 (third-party)


Third-party SIP device (advanced) = 6 (third-party


From this doc;


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item0900aecd805009fc.shtml


Hope this helps!

Rob




Actions

This Discussion