08-04-2008 02:43 AM
Hi,
what I have to configure for discovery IP phones in my network. Have I to configure SNMP on the CCM? Thank you.
Solved! Go to Solution.
08-08-2008 02:35 PM
To perform network management, we can use CISCO-CCM-MIB to get provisioning and statistical information about Cisco Call Manager, its associated devices (e.g. IP phones and gateways), and its configuration
The below URL may help to get more information:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/3_0_rem/snmpmibs.html
08-08-2008 02:35 PM
To perform network management, we can use CISCO-CCM-MIB to get provisioning and statistical information about Cisco Call Manager, its associated devices (e.g. IP phones and gateways), and its configuration
The below URL may help to get more information:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/3_0_rem/snmpmibs.html
11-10-2009 04:05 AM
Hi Friend,
I need your help in this...
I have CCM 7.1.2 & Netmanager 1.1....Kindly find the issues:
1. CCM is being discovered as HOST where as it should be discovered as Communication Manager.
2. IP Phones are not getting discovered automatically.
3. I discovered the Phones manually but i am unable to monitor the status of the phones.
4. After acknowledging the events still there are RED indinations of the events.
Kindly help me friend.
Rgds,
Partha
11-06-2008 03:45 AM
Hello, I have the same issue with netmanager 1.1 and CCM5.1. Has anybody solved it?
I have the SNMP service running under Windows XP netManager Server, as it is explained in the document you linked before.
Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide