08-04-2008 03:35 AM - edited 03-03-2019 11:00 PM
I`m trying to modify nex-hop address when redistributing from BGP to ISIS.
My problem is that I have å router doing redistribution from BGP to ISIS but I don`t want traffic going to that router.
Has anyone done this?
08-04-2008 03:44 AM
Hi,
I havent tried this, but you should be able to this by using a route-map in the redistribution statement.
Simply put an entry in the route-map to change the next hop,
ie.
route-map bgp2isis permit 10
set ip next-hop x.x.x.x
Give it a shot and see if it works...
HTH
LR
08-04-2008 04:08 AM
Hi,
I tried that with the following configuration:
Router ISIS
redistribute bgp 65010 metric 15000 route-map BGP-2-ISIS
ip access-list standard BGP-2-ISIS-ACL
permit 192.168.127.0 0.0.0.255 log
deny any log
route-map BGP-2-ISIS permit 10
match ip address BGP-2-ISIS-ACL
set ip next-hop 192.168.91.1
08-04-2008 06:41 AM
The set ip next-hop is a policy route command you want just set next-hop
Not real sure this is going to work. Normally when you redistribute a into a routing protocol you are saying I know how to get to this network so come to me. I use ISIS so little I forget if it keeps a next-hop field in his database.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: