VPN Clients Only See Directly Conencted Network

Answered Question
Aug 4th, 2008

Hello - I have a Pix 515 that I am using for VPN. Everything works, except once connected, the clients (172.16.3.0) can only see the directly connected network (192.168.2.0), and not any of our other subnets. Whats missing?

Attachment: 
I have this problem too.
0 votes

Andy,

The ASA inside IP Subnet is 192.168.2.0/24 - but you do not have routes to indicate any other subnets of the 192.168.0.0/16 exist. if you have more subnets on the inside network, then you need to let eh ASA know about them eg:-

route inside 192.168.1.0 255.255.255.0 <>

You should also decided if you are going to tunnel all traffic, or split-tunnel.

HTH>

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer

Andy,

The ASA inside IP Subnet is 192.168.2.0/24 - but you do not have routes to indicate any other subnets of the 192.168.0.0/16 exist. if you have more subnets on the inside network, then you need to let eh ASA know about them eg:-

route inside 192.168.1.0 255.255.255.0 <>

You should also decided if you are going to tunnel all traffic, or split-tunnel.

HTH>

Actions

This Discussion